AmeriVent Direct Vent
Pipe and Fittings feature rugged, co-axial tube construction with
a stainless steel inner wall and a galvanized steel outer wall separated
by two spacers. The twist-lock joints offer fast installation, and
the factory installed inner gasket ensures a leak-free joint. This
product is also available in matte black.
Available in the following:
Sizes 4" x 6 5/8" and 5" x 8"
Lengths 7", 12", 2', 3', 4'
Adjustable Length
Telescopes onto standard
pipe sections for adjustments from 4" to 10". Adjustable
lengths are also available in matte black.
Available in the following:
Sizes 4" x 6 5/8" and 5" x 8"
Lengths adjust from 4" to 10"
45° Elbow
45º elbows are used
with 45º fireplace adaptors or in pairs to "go around"
obstructions. Pipe sections may be added between elbows for additional
offset. Elbows are also available in matte black.
Available in the following:
Sizes 4" x 6 5/8" and 5" x 8"
90° Elbow
The four-section design
of the elbow provides smooth low resistance 90º offset. Elbows
are also available in matte black.
Available in the following:
Sizes 4" x 6 5/8" and 5" x 8"
Vertical Cap
Vertical caps are corrosion
resistant with a stainless steel inner wall. The low restriction design
improves efficiency. Vertical caps are used for vertical vents.
Available in the following:
Sizes 4" x 6 5/8" and 5" x 8"
Horizontal Cap
Horizontal caps are corrosion
resistant with a stainless steel inner wall. The low restriction design
improves efficiency and minimizes wall temperature. Horizontal caps
are used for horizontal vents.
Available in the following:
Sizes 4" x 6 5/8" and 5" x 8"
Snorkel Cap
Snorkel Caps are used
for horizontal vent installations that require a vertical rise on
the exterior of the building. Corrosion resistant construction with
stainless steel inner wall with a low restriction design improves
efficiency and minimizes wall temperature.
Available in the following:
Sizes 4" x 6 5/8" and 5" x 8"
Wall Thimble
The Wall Thimble provides
clearance and firestopping for through-the-wall installations. A Wall
Thimble can be used with a matte black painted Face Plate for the
interior wall.
Available in the following:
Sizes 4" x 6 5/8" and 5" x 8"
Wall Strap
The Wall Strap provides
lateral support for vent and offsets while maintaining a 2" clearance
from the wall.
Available in the following:
Sizes 4" x 6 5/8" and 5" x 8"
Firestop Support Plate
The Firestop Support Plate
provides vertical support for vents and offsets while maintaining
clearance from the wall and providing a firestop. The Firestop Support
Plate can be used with the matte black painted Face Plate for the
interior ceiling.
Available in the following:
Sizes 4" x 6 5/8" and 5" x 8"
Face Plate, Celing Support / Wall
Thimble
The Face Plate may be
used as a decorative cover for the Firestop Support Plate or Wall
Thimble. The Face Plate has a matte black painted surface for an interior
wall.
Available in the following:
Sizes 4" x 6 5/8" and 5" x 8"
Roof Support
A Roof Support is used
as a support and a firestop in sloped ceiling installations. The Roof
Support Trim Plate is a decorative trim used to conceal rough opening
where the Roof Support passes through the ceiling. The Roof Support
fits from flat to 12/12 pitch ceilings. The Roof Support and Roof
Support Trim Plate are painted matte black.
Available in the following:
Sizes 4" x 6 5/8" and 5" x 8"
Storm Collar
The Storm Collar is used
above Flashing. Use mastic to seal Storm Collar to Vent Pipe.
Available in the following:
Sizes 4" x 6 5/8" and 5" x 8"
Flashings
Standard Flashing fits flat to 5/12 pitch roofs. Flashing
is double seamed for protection from leakage.
Steep Pitch Flashing fits 6/12 to 12/12 pitch roofs. Flashing
is double seamed for protection from leakage.
Available in the following:
Sizes 4" x 6 5/8" and 5" x 8"
Attic Insulation Shield
The Attic Insulation Shield
is used on single-story or on top story of multi-story buildings.
The Shield is used to keep insulation from making direct contact with
vent pipe.
Available in the following:
Sizes 4" x 6 5/8" and 5" x 8"
Co-Linear Appliance Adaptor
Connectors are used at
appliance for connecting from Co-Axial Start Collars to a pair of
Co-Linear Tubes passing through existing chimneys.
Available in the following:
Sizes 4" x 6 5/8"
Co-Linear Top Kit
The Co-Linear Top Kit
is used at the top of existing chimney to convert Co-Linear tubes
to Co-Axial AmeriVent Direct.
