Our double wall corrugated aluminum gas vent segments easily connect
from the appliance to AmeriVent® Type B Gas Vent. It may be compressed
up to four inches per foot to shorten lengths. Sturdy galvalume ends
offer the proven AmeriVent® snap-lock design.
Available in the following:
Sizes 3" through 5"
Lengths 2', 3', 4' and 5'
Single-Wall Vent Connector
Our single wall corrugated aluminum
pipes easily connect from the appliance to AmeriVent® Type B Gas
Vent. It may be compressed up to four inches per foot to shorten lengths.
Sturdy galvalume ends offer the proven AmeriVent® snap-lock design.
Available in the following:
Sizes 3" through 5"
Lengths 12", 24", 3', 4' and 5'
Standard Single
Wall Wye
Standard Single Wall Wyes feature
identical
branch, trunk and base diameters.
Available in the following:
Sizes 3" and 4"
Reduction Single
Wall Wyes
Reduction wyes feature branch and/or
base with smaller diameter than trunk size. They also offer a convenient
connection for furnace and water heater in common connector.
Available in the following:
Sizes 4" and 5"
Single Wall Increaser
Single Wall Increasers are used to
increase the single wall appliance connector diameter and feature
snap-lock on both ends.
Available in the following:
Sizes 3" through 5"
Single Wall Appliance
Connector
Connectors are sized to fit outlet.
Use sheet metal screws for code approved appliance connection at the
outlet.
Available in the following:
Sizes 3" through 5"
Single Wall Universal
Adaptor
Short slip connection with AmeriFlex®
single wall snap-lock base attaches to non-AmeriVent® installed
above.
Available in the following:
Sizes 3" through 5"
Vent Pipe Hanger
Provides 1½" spacing (order
same size as AmeriFlex)
Available in the following:
Sizes 3" through 5"
Firestop Support
Plate
Serves as a support and firestop where
AmeriVent Type B Gas Vent passes through ceiling.
Available in the following:
Sizes 3" through 5"
Assemblies
Assemblies consist of flexible connectors
with the appliance connector and universal adaptor pre-assembled.
