• Wide border compensates for oversize floor openings.
• Strong rolled edge face bars set at graduated angles for wide diffusion.
• Parallel valves deflect air to wall or into room.
• All steel construction.
• Brown or white finish.

Link to Technical data.
(Please note, all technical data on this site is provided in the Adobe Portable Documnet Format [.pdf]. You must have Adobe's Acrobat Reader installed to view these files.

2 x 10	2 x 12	2 x 14
4 x 10	4 x 12	4 x 14

To determine required product size, measure duct opening.

• Strong, individually assembled face bars with extra wide border.
• Widespread air diffusion.
• Parallel valves deflect air to wall or into room.
• All steel construction.
• Brown finish. (white available in sizes noted below)

Link to Technical data.
(Please note, all technical data on this site is provided in the Adobe Portable Documnet Format [.pdf]. You must have Adobe's Acrobat Reader installed to view these files.

2 x 10	2 x 12	2 x 14
4 x 10*	4 x 12*	4 x 14
6 x 10*	6 x 12*	6 x 14

*available in white
To determine required product size, measure duct opening.

• Three grille bars to the inch. (part #456)
• Air is directed left and right at fixed 22° angle.
• Multi-louvre damper for wide air dispersion.
• Spring tension on multi-louvre damper for smooth lever operation.
• Reinforcement bar.
• All steel construction.
• Brown finish. (white available in sizes noted below)

Link to Technical data.
(Please note, all technical data on this site is provided in the Adobe Portable Documnet Format [.pdf]. You must have Adobe's Acrobat Reader installed to view these files.

4 x 8*

*available in white
To determine required product size, measure duct opening.

• Two grille bars to the inch
• Air is directed left and right at fixed 22° angle.
• Multi-louvre damper for wide air dispersion.
• Spring tension on multi-louvre damper for smooth lever operation.
• Reinforcement bar.
• All steel construction.
• Brown finish.

Link to Technical data.
(Please note, all technical data on this site is provided in the Adobe Portable Documnet Format [.pdf]. You must have Adobe's Acrobat Reader installed to view these files.

4 x 8

To determine required product size, measure duct opening.

• Individually assembled strong steel bars.
• Multi-louvre damper
• Listed size is duct size.
• Overall size is listed size plus 1 15/16".
• Free Area= Listed duct size X 0.7.
• Brown finish.

6 x 10	6 x 12	6 x 14
8 x 10	8 x 12
	9 x 12
	10 x 12
		12 x 14

To determine required product size, measure duct opening.

• Individually assembled strong steel bars.
• Brown finish
• Listed size is duct size.
• Overall size is listed size plus 1 15/16".
• Free Area= Listed duct size X 0.7.

4 x 8	4 x 10	4 x 12	4 x 14
	6 x 10	6 x 12	6 x 14			6 x 24		6 x 30
	8 x 10	8 x 12	8 x 14	8 x 16	8 x 20	8 x 24		8 x 30
	10 x 10	10 x 12	10 x 14		10 x 20	10 x 24		10 x 30
		12 x 12	12 x 14		12 x 20	12 x 24		12 x 30
			14 x 14	14 x 16	14 x 20	14 x 24	14 x 25	14 x 30
					16 x 20	16 x 24		16 x 30
					20 x 20	20 x 24	20 x 25	20 x 30
						24 x 24

To determine required product size, measure duct opening.

• Three grille bars to the inch.
• Air is directed left and right at a 22° angle.
• Full range multi-louver damper adjusts from 45° down to fully closed up position.
• Spring tension on multi-louvre damper for smooth level operation.
• Extra wide 3 1/4" base extension covers most floor openings.
• All steel construction.
• White finish.

Link to Technical data.
(Please note, all technical data on this site is provided in the Adobe Portable Documnet Format [.pdf]. You must have Adobe's Acrobat Reader installed to view these files.

8 x 6
10 x 6
12 x 6	12 x 8
14 x 6

To determine required product size, measure duct opening.

• 1/3" Vertical face bars.
• Multi-louvre damper directs heat along floor.
• 7/8" Baseboard extension.
• All steel construction.
• White finish.

Link to Technical data.
(Please note, all technical data on this site is provided in the Adobe Portable Documnet Format [.pdf]. You must have Adobe's Acrobat Reader installed to view these files.

8 x 6
10 x 6
12 x 6	12 x 8
14 x 6

To determine required product size, measure duct opening.

• Duct size = listed size.
• 1/3" Face bar spacing.
• 22° Down deflection.
• All steel construction.
• Overall size = listed size plus 1 1/2".
• White finish.

Link to Technical data.
(Please note, all technical data on this site is provided in the Adobe Portable Documnet Format [.pdf]. You must have Adobe's Acrobat Reader installed to view these files.

10 x 6
12 x 6	12 x 8
14 x 6	14 x 8
24 x 6	24 x 8
30 x 6	30 x 8

To determine required product size, measure duct opening.

• Duct size = listed size.
• 3 1/4" Base extension.
• 22° Down deflection.
• All steel construction.
• Overall size = listed size plus 1 1/4".
• White finish.

Link to Technical data.
(Please note, all technical data on this site is provided in the Adobe Portable Documnet Format [.pdf]. You must have Adobe's Acrobat Reader installed to view these files.

10 x 6
12 x 6
14 x 6	14 x 8
24 x 6	24 x 8
30 x 6	30 x 8

To determine required product size, measure duct opening.

• Extra-wide border compensates for over-size openings and offers easier installations.
• Stamped face bars set at graduated angles for wide air diffusion.
• Durable white or brown electro deposition paint finishes.

Link to Technical data.
(Please note, all technical data on this site is provided in the Adobe Portable Documnet Format [.pdf]. You must have Adobe's Acrobat Reader installed to view these files.

10 x 2
12 x 2
14 x 2

To determine required product size, measure duct opening.

• Free area = listed size x 0.61.
• Duct size = listed size.
• May be used as supply or return.
• All steel construction.
• White or brown finish.

10 x 3
12 x 3
14 x 3

To determine required product size, measure duct opening.

• Duct size = listed size.
• Adjustable damper.
• All steel construction.
• White finish.

10 x 3
12 x 3
14 x 3

To determine required product size, measure duct opening.

• Duct size = listed size.
• Adjustable damper.
• All steel construction.
• White or brown finish.

12 x 2
14 x 2

To determine required product size, measure duct opening.

• Duct size = listed size.
• One-piece damper.
• All steel construction.
• White finish.

12 x 6
14 x 6

To determine required product size, measure duct opening.

• Sunburst pattern diffusers spread warm air over a wide area.
• Single valve with center control.
• 3015/3018 are supply models. 4015/4018 are matching returns.
• All steel construction.
• White or brown finish.
• 3" Base Extension.

Link to Technical data.
(Please note, all technical data on this site is provided in the Adobe Portable Documnet Format [.pdf]. You must have Adobe's Acrobat Reader installed to view these files.

Width: 15" and 18"

To determine required product size, measure duct opening.