 |
 |
Round Diffuser
Diffuser Ring
Dampers
Collars
Lay-In Panel
Diffusers
T-Bar Lay-In Diffusers
back to top
back to top
back to top
back to top
back to top
back to top
back to top
back to top
back to top
back to top
back to top
|
| Round Steel
Ceiling Diffuser - 1500 |
|
|
- Overlapping rings stepped-down for efficient, draft-free diffusion.
- Outer ring design resists ceiling smudging.
- Center cone slotted for optional operation.
- All steel construction.
- Use with Round Ceiling Damper - 1800.
- White finish.
|
Available in the following:
Duct Sizes: 6", 8", 10", 12" and 14"
To determine required product size, measure duct opening.
|
| Round Steel Ceiling
Diffuser Ring - 1900 |
|
|
- All steel construction.
- For installation of diffuser when damper is not used.
- Brown finish.
|
Available in the following:
Duct Sizes: 6", 8", 10", 12" and 14"
To determine required product size, measure duct opening
|
| Round Steel Ceiling
Damper - 1800 |
|
|
- Knob operated worm gear adjusts patented
butterfly valve – only 2½ turns to full open or close.
- Controls volume – not air pattern.
Minimum air restriction.
- Galvanized and unpainted steel damper.
- Steel ring has brown finish.
- Includes adjusting handle.
|
Available in the following:
Duct Sizes: 6", 8", 10", 12" and 14"
To determine required product size, measure duct opening
|
| Snap On Damper
- 1200 |
|
|
- Knob operated worm gear adjusts patented butterfly valve – only 2½ turns to full open or close.
- Controls volume – not air pattern. Minimum air restriction.
- Galvanized, unpainted steel damper.
- Includes adjusting handle
|
Available in the following:
Duct Sizes: 6", 8", 10", 12" and 14"
To determine required product size, measure duct opening
|
| Snap On Collar
- 6400 |
|
|
- Fiberglass gasket supplied for sizes 6", 8", and 10".
- Unit mounts easily to 6100
or 6400 series
diffusers via pre-punched mounting holes in plenum and 4 bayonet
clips supplied with collar.
- Galvanized steel construction.
- Use with steel back diffuser.
|
Available in the following:
Duct Sizes: 6", 8", 10", 12" and 14"
To determine required product size, measure duct opening
|
| Collar - for
fiberglass back - 5000 |
|
|
- All steel construction.
- For use with fiberglass back diffusers
(models 6004
and 6006)
|
Available in the following:
Duct Sizes: 6", 8", 10", 12" and 14"
To determine required product size, measure duct opening
|
| Lay-In Panel -
RA674 |
|
|
- Steel construction.
- For use in T-Bar ceiling applications.
- Can be used with RA2500 and RA2600 products.
|
Available in the following:
Duct Sizes: 6", 8", 10", 12" and 14"
To determine required product size, measure duct opening
|
| Aluminum Extruded
Diffuser - Opposed blade damper - RA2500 |
|
|
- A low cost diffuser with factory-installed
unitized opposed blade damper — hidden damper operator with
finger-tip control lever.
- Five pattern styles for one, two, three,
four and two-way corner air flow.
- Four screw holes for tight ceiling fit.
- Aluminum construction.
- White finish.
- Available in a smooth faced WN, no-hole
surface as a special order.
Link
to Technical data.
(Please note, all technical data on this site is provided in the
Adobe Portable Documnet Format [.pdf]. You must have Adobe's Acrobat
Reader installed to view these files.
Available in the following:
| 1 way |
| 6 x 6 |
|
|
|
| |
8 x 8 |
|
|
| |
|
10 x 10 |
|
| |
|
|
12 x 12 |
| 2 way |
| 6 x 6 |
|
|
|
| |
8 x 8 |
|
|
| |
|
10 x 10 |
|
| |
|
|
12 x 12 |
| 3 way |
| 6 x 6 |
|
|
|
| |
8 x 8 |
|
|
| |
|
10 x 10 |
|
| |
|
|
12 x 12 |
| 4 way |
| 6 x 6 |
|
|
|
| |
8 x 8 |
|
|
| |
|
10 x 10 |
|
| |
|
|
12 x 12 |
| 5 way |
| 6 x 6 |
|
|
|
| |
8 x 8 |
|
|
| |
|
10 x 10 |
|
| |
|
|
12 x 12 |
To determine required product size, measure duct opening |
| Aluminum Extruded
Diffuser - Parallel damper - RA2600 |
|
|
- A low cost diffuser with factory-installed
unitized multi-louvered damper — hidden damper operator with finger-tip
control lever.
- Five pattern styles for one, two, three,
four and two-way corner air flow.
- Four screw holes for tight ceiling fit.
- Aluminum construction.
- White finish.
- Available in a smooth faced WN, no-hole
surface as a special order.
Link
to Technical data.
(Please note, all technical data on this site is provided in the
Adobe Portable Documnet Format [.pdf]. You must have Adobe's Acrobat
Reader installed to view these files.
Available in the following:
| 1 way |
| 6 x 6 |
|
|
|
| |
8 x 8 |
|
|
| |
|
10 x 10 |
|
| |
|
|
12 x 12 |
| 2 way |
| 6 x 6 |
|
|
|
| |
8 x 8 |
|
|
| |
|
10 x 10 |
|
| |
|
|
12 x 12 |
| 3 way |
| 6 x 6 |
|
|
|
| |
8 x 8 |
|
|
| |
|
10 x 10 |
|
| |
|
|
12 x 12 |
| 4 way |
| 6 x 6 |
|
|
|
| |
8 x 8 |
|
|
| |
|
10 x 10 |
|
| |
|
|
12 x 12 |
| 5 way |
| 6 x 6 |
|
|
|
| |
8 x 8 |
|
|
| |
|
10 x 10 |
|
| |
|
|
12 x 12 |
To determine required product size, measure duct opening |
| Supply
Models - 6004, 6006, 6100 and 6400 series |
| Perforated supply, insulated - 6004 and 6006 |
 |
| Perforated supply, steel back, non-insulated
- 6100 |
 |
| 4 cone, steel back, insulated - 6400 Series |
 |
|
- Perforated steel face.
- Steel back plenum.
- Fiberglass insulation for thermal and accoustical absorbtion
(also available non-insulated).
- 360° Air Diffusion.
- White finish.
- 4 Individually adjustable, directional air control blades, adjustable
from the face of the unit.
Link
to Technical data.
(Please note, all technical data on this site is provided in the
Adobe Portable Documnet Format [.pdf]. You must have Adobe's Acrobat
Reader installed to view these files.
Available in the following:
Size 24" x 24"
To determine required product size, measure duct opening
|
| Return
Models - 6003 and 6101 |
| Perforated return, steel back, insulated |
|
| Perforated return, steel back, non-insulated
also available. |
| |
|
- Fiberglass insulation covering all-steel
construction
- Drop-down core for high volume capacity.
- Four screw holes for tight ceiling fit.
- White finish.
Link
to Technical data.
(Please note, all technical data on this site is provided in the
Adobe Portable Documnet Format [.pdf]. You must have Adobe's Acrobat
Reader installed to view these files.
Available in the following:
Size 24" x 24"
To determine required product size, measure duct opening
|
| Grille
- 7000 |
| Perforated grille |
 |
|
- All-steel construction
- Four screw holes for tight ceiling fit.
Available in the following: Size 24"
x 24"
To determine required product size, measure duct opening |
|
